Installing the Wii MotionPlus

1. Remove the original Wii Remote Jacket from the Wii Remote and keep it in a safe place for future use if the Wii MotionPlus is removed.
2. Make sure the lock on the back of the Wii MotionPlus is in the unlocked position, with the arrow visible.


3. Insert the Wii Remote all the way into the Wii MotionPlus Jacket.


4. Insert the wrist strap through the hole in the back of the Wii MotionPlus Jacket and pull it completely through.


5. While twisting the Wii MotionPlus slightly, gently pull the Wii MotionPlus accessory down and over the end of the Wii Remote.


6. Hold down the release buttons on both sides of the Wii MotionPlus accessory and insert the plug into the External Extension Connector on the bottom of the Wii Remote.


7. Make sure that neither the wrist strap nor jacket are pinched between the Wii Remote and the Wii MotionPlus.


8. Lock the Wii MotionPlus in place by sliding the switch in the direction of the arrow.


9. Place hand through the wrist strap and adjust the strap lock so that it will not fall off your wrist. If the wrist strap has one, close the lever to hold it in place. (Some strap locks do not have a lock lever.)